Fire Alarm Monitoring

Automatic signalling from your fire alarm to a central station, so an alarm is acted on even when the building is empty.

What you get

Why monitor a fire alarm?

A local bell only works if someone is there to hear it and call for help. Monitoring sends the alarm automatically to a central station, so it is acted on even when the building is empty — overnight, at weekends, or between shifts.

How it works

  1. The fire alarm activates on site.
  2. A signalling unit on the panel sends the alarm over two separate paths.
  3. Aspire central station receives the signal.
  4. Operators contact your keyholders and follow the response you have agreed.

You are not relying on a single phone line or someone being in the building.

The signalling unit — CSL GradeShift Pro

CSL GradeShift Pro dual-path signalling unit used for fire alarm monitoring

We fit a CSL GradeShift Pro to the fire panel. It is a dual-path unit, which means it uses two independent routes to reach the central station:

  • Radio + Radio — two mobile networks
  • LAN + Radio — fixed internet plus a mobile network

If broadband fails, the mobile signal is blocked, or a cable is cut, the second path still carries the alarm. Higher grades report a total path failure more quickly. DP4 is designed to report catastrophic failure within about three minutes, which supports the transmission requirements in BS 5839 for Category L systems.

Who receives the signal — Aspire

Aspire is the independent alarm receiving centre we use. When a fire signal arrives, Aspire contacts the people you nominate and keeps a record of the event. You choose the keyholders and the response you want.

What happens when the alarm activates

  1. The panel sends the signal through the CSL unit
  2. Aspire receives it and calls keyholders in the order you set
  3. A keyholder attends, or the fire service is called if a fire is confirmed
  4. The event is logged

Monitoring is not a call straight to the fire service. The centre follows the response you have agreed.

What monitoring is not

  • Not a substitute for six-monthly maintenance
  • Not nurse call — that is for assistance, not evacuation
  • Not useful if keyholder numbers are out of date

Benefits

  • Alarms are sent automatically, day or night
  • Two paths reduce the chance of a missed signal
  • Keyholders are contacted quickly
  • Supports BS 5839 transmission requirements
  • Useful for insurers and empty or out-of-hours buildings
  • A clear record of each event

What we do

  • Survey the site and agree the signalling grade
  • Supply and install the CSL GradeShift Pro
  • Connect it to Aspire and commission the system
  • Hand over with keyholder details and response instructions
  • Maintain the fire system and the signalling path

Security alarm monitoring

The same approach can be used for intruder alarms. A CSL unit sends confirmed activations to Aspire so a break-in is reported when the premises are empty. Fire monitoring is our main focus; security monitoring is available where it suits the site.

Request a free survey 0161 241 0211

Monitoring is available across Manchester, Cheadle, Stockport and the North West. Contact us for a free site survey.

Need fire alarm monitoring?

CSL signalling to Aspire central station. BAFE SP203-1 registered. Manchester and the North West.